34 E Germantown Pike,

Norristown, PA 19401

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

34 E Germantown Pike,

Norristown, PA 19401

Blocked Sink? 6 Simple Methods To Help

With a few household things and these easy steps, you can learn the way to unclog a sink and save yourself a call to a plumber.

Obstructed home kitchen sinks are amongst the most common drainage issues that home owners face. Blocked drain pipes are also one of the simplest house repairs to carry out on your own.

When it comes to the kitchen sink, do not think Drano or other chemical-based drain cleaners are the quick treatments. Even though the block appears to be cleared, the chemicals can in some cases do additional damage to your system.

Do not think about calling the plumbing contractor just yet! There’s a good chance you can fix the issue yourself with just one of these six kitchen sink unclogging techniques:

1. Attack with boiling water

When hair, grease, soap residue, and other dirt become clogged in your drain, boiling water might be all that is required to clear the blockage. It’s the most convenient service, hence it should be your first choice when trying to unblock a sink.

Here are the actions to take, which are as simple as 1-2-3:

 

  • Bring half a gallon of water to a boil on the stove, or heat the water in a kettle.
  • Boiling water should be put instantly into the drain hole
  • Turn on the faucet and examine to see if the water empties effortlessly. Repeat the technique if it is still emptying slow or standing still in the sink.

 

Very important: Do not try this technique if your drain is connected to PVC pipes, as the boiling water might melt or damage the plastic.

 

It’s time to try another technique if the boiling water fails to clear the blockage on the 2nd try. You have a sink blockage that is challenging to the simple boiling water service.

Some jobs are better left to the pros...

Sink still not draining? Get No-Commitment Estimates!

2. Inspect the garbage disposal

It could be the source of your drainage problems if you have a garbage disposal in your sink. Turning it on will usually break it apart if the blockage is in the trash disposal.

 

Overheated or faulty disposals might not even turn on, but you might quickly reboot them by pressing the reset button on the side or bottom of the device. After resetting the disposal, reboot it to clear the blockage.

 

When you turn on the disposal, you might hear a low humming sound, which indicates that the device is jammed or malfunctioning. Prior to trying to repair your disposal, remember to switch off the electrical energy and never ever– and we mean never ever– place your hand in the disposal.

 

You can then try to break up the blockage in the disposal by manually turning the blades. Place an Allen wrench into the opening on the bottom of the disposal and twist till you feel less resistance, suggesting that the clog is breaking apart.

3. Plunge away the clog

It’s time to pull out the plunger once you have actually verified that the garbage disposal isn’t the issue. However bear in mind that, while you can use a toilet plunger if that’s all you have, Expert Plumbing services recommend using a flat-bottomed one for the task.

With the plunger in hand, follow the following tasks:

  • Fill the sink with hot water till it’s midway full, forming a seal around the drain.
  • Put the plunger over the drain and quickly pump up and down numerous times.
  • See and remove the plunger whether or not the water empties.
  • Repeat this step till the water empties freely.

 

You know what to do if the sink is still not emptying properly after numerous plunging efforts. It’s time to try our next technique.

4. Break it down with baking soda and vinegar

This technique is a more natural option to using chemical drain cleaners in order to unclog drain pipes. Baking soda and vinegar are extra typical home items that you are likely to have in your kitchen.

In order to allow the mixture so as to perform its magic, follow these measures:

  • Utilizing a cup or bowl, take out any standing water from the sink.
  • Pour 1 cup of baking soda down the drain, pushing the powder down with a spatula or spoon if needed.
  • 1 cup of white vinegar need to be poured down the drain.
  • Seal the drain opening with a stopper or cover.
  • Enable the mixture so as to rest for 15 minutes.
  • Take out the cap and flush the drain with hot water.

 

This natural method, like any other unclogging technique, does not ensure success. If, after finishing the steps, it looks like you are making progress on the blockage, repeat the steps.

5. Attempt the plumber’s snake

Clogs that fight back will need making use of a plumber’s snake to clear the blockage. The tool has a spiral snake that is coiled and reaches down into the drain. When the snake enters into contact with a clog, crank the handle to break the waste and draw it out of the drain.

 

Electric snakes have even higher power to unclog drain pipes.

 

If you do not have a plumber’s snake, you can make one out of a wire coat hanger. Just unwind the hanger into a long strand of wire with a set of needle-nose pliers.

 

Keep the hooked end because it will be utilized to get onto the debris. If required, use the pliers to modify the hook’s angle so that it fits quickly into the drain opening.

 

Whatever tool you’re using, simply feed it a few feet at a time down the drain. If you press too hard, you might inadvertently press the blockage further down the pipe.

 

When the tip of your tool enters into contact with a clog, hook it on and drag the debris up into the drain.

Local Plumber-Sink P-Trap Diagram Plumbing

6. Clean the P-trap

If the water still does not drain properly, there could be a clog in the P-trap, which is the elbow-shaped pipe under your sink. Food, grease, and other build up might become stuck in the pipe, resulting in your sink to drain slowly or not at all as the water meets a snag on its way down.

 

The plan is to take off the pipe and clear away the trash that is blocking it. Caution: This task can get a little filthy, so arm yourself with safety glasses, gloves, and towels.

When you’re ready, clear the P-trap as follows:

  • Put a container under the pipe. This will gather any backed-up water or dirt that might fall out when the P-trap is opened.
  • Unscrew the trap connectors that connect the curved piece to the horizontal and vertical drain pipes. On either end of the P-trap, a slip nut need to exist.
  • Remove the P-trap and scrub the pipe of any dirt, grime, or residue.
  • Reattach the trap. Turn on the faucet to clear the drain.

 

If the drain issue continues poor, the block could be further up the pipe. You return under the sink to locate the source of the blockage.

Here’s what you want to do:

  • Repeat the method that takes off the P-trap.

 

  • The horizontal pipe that connects the system to the wall should be taken off.

 

  • Go into the wall pipe with a plumber’s coat, snake, or auger hanger. Utilize your tool to remove it from the pipe when you discover a clog.

 

  • Repeat the process till all build up has actually been taken off.

 

  • Reassemble the pipes and P-trap by hand tightening the connectors. (A note of caution: Do not over tighten, as this might cause the connectors to damage).

 

  • Flush the drain with hot water.

 

  • Inspect under the sink while the water is running to be sure there isn’t any dripping from the pipes before you celebrate your success.

 

If you do see leaks, verify that all connectors are firmly connected. As soon as you’re free of the drips, simply dry any water spilled from under the sink or on the flooring, and you’re ready to go.

If you have actually gotten this far and your sink is still not draining, there could be an even bigger issue at hand. It’s time to quit and arrange an appointment with a plumber for an experienced repair.

How to prevent future blockages

Now that your kitchen sink is draining effectively again, make certain you’re acting to lower future blockages. The most crucial preventative step is to avoid flushing hazardous items down the drain.

 

This includes the following:

 

  • Grease, fats, and oils
  • Meats
  • Coffee grounds
  • Eggshells
  • Starchy foods, such as pasta, bread, or rice
  • Fruit peels, pits
  • Gum
  • Paint
  • Paper items, such as paper towels or food wrappers

 

Instead, put frying oil into an old can and throw it after it’s filled. Certain waste, such as coffee grounds, can be put into mulch or natural waste.

 

Plumbers also advises that house owners not overload their garbage disposal. Prevent grinding more than one cup of food waste at a time, and, of course, avoid dealing with any of the above items.

 

Another excellent maintenance suggestion is to make an equal mixture of vinegar and water and freeze it in an ice cube tray.

 

Grind a handful of the cubes down your garbage disposal once a month to scrape away food waste and keep the system well-kept.

 

Running boiling water down the drain after each sink usage is another wise practice for the benefit of your pipes. You need to also use a drain cover to trap debris before it leads to harm to the pipes.

 

While clogged up drains are a simple Do It Yourself task, being gotten ready for significant plumbing issues before they occur is always a wise plan.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project

Proud to Install, Repair, and Service the Following Brands: